D150
The D150 digital stereo preamplifier expands McIntosh’s digital music capabilities by supporting many of the newest digital audio formats such as DSD and DXD. A USB input accepts up to 32-bit/384kHz signals and supports DSD64, DSD128, DXD 352.8kHz and DXD 384kHz. Two coaxial and two optical inputs accept up to 24-bit/192kHz signals. It is a simple solution to add the latest digital music formats to your existing system.
The D150 and MCT450 “just ran happily and unobtrusively, doing what they were asked, and doing it to the highest possible audible standards… They bring together the very highest levels of high fidelity performance, and reliable, feature-laden delivery. This is truly impressive gear.” – Audio Esoterica
The D150 and MCT450 combo plays “perfectly and in the right way… the dynamics of these two McIntosh seems to have no comparison!” – audio-activity.com
For price, performance and overall rating, the D150 and MCT450 were awarded the Uber level with 97 points out of 100. – Stereoplay
Balanced and unbalanced connections are available for both variable and fixed volume audio outputs, providing flexibility in setting up and connecting your system. Or simply add an amplifier, a pair of speakers and a digital source for a complete digital based stereo system. For enjoying SACDs, the unique DIN input connects to select McIntosh models with a DIN output – like the MCT450 SACD/CD transport – to deliver the purist possible sound quality. It’s also flexible enough to be used as a headphone amplifier; just connect your digital sources and a pair of headphones, such as the MHP1000(not included), for a personal listening experience.
After using the D150 and MCT450, McIntosh “digital products are as excellent as their amplifiers, the quality is stable and fabulous as usual and also able to integrate with the Hi-Res audio trend. McIntosh products are equipped with various functions, making them flexible.” – Audio Technique
The D150 uses the same revered DAC as the D100, featuring an 8 channel, 32-bit, 500kHz D/A converter with wide dynamic range and extremely low distortion. Eight channel D/A converter is used in stereo Quad Balanced mode. Music at all levels is reproduced with extreme precision and elegance. A 1/8” mini jack is provided for control data from the data output jack of a McIntosh preamp or A/V Control Center. It shares the classic façade, knobs and handcrafted black-glass front panels as all other McIntosh components in a small form factor of just under 4″ in height.
€3,600.00
Podrobnosti o izdelku
TOTAL HARMONIC DISTORTION
0.0015%
FREQUENCY RESPONSE
+/-0.5dB from 4Hz to 20,000Hz
+0.5/-3dB from 4Hz to 68,000Hz (Source dependent)
MAXIMUM VOLTS OUT (BALANCED / UNBALANCED)
16/8 V RMS
INPUT IMPEDANCE (BALANCED / UNBALANCED)
44K ohm, 22K ohm
PHONO VOLTAGE GAIN
N/A
HIGH LEVEL VOLTAGE GAIN
N/A
SIGNAL TO NOISE RATIO
110dB
DUAL MONO POWER SUPPLY
No
DUAL MONO, FULLY BALANCED
Digital, Fully Balanced
HEADPHONE OUTPUT
Yes 1/4″, High Drive
INPUTS UNBALANCED
No
INPUTS BALANCED
No
VARIABLE OUTPUTS UNBALANCED
1 Stereo
VARIABLE OUTPUTS BALANCED
1 Stereo
DIGITAL USB INPUT
1 (2.0, 32/192 Asynchronous)
44.1kHz to 384kHz, 32-Bit (PCM) DSD64, DSD128, DXD352.8kHz, DXD384kHz
DIGITAL COAXIAL INPUT
2
DIGITAL OPTICAL INPUT
2
DIGITAL MCT INPUT
1
PHONO MOVING MAGNET INPUT
No
PHONO MOVING COIL INPUT
No
RECORD PROCESSOR LOOP
No
INPUT LEVEL MATCH
No
HOME THEATER PASS THROUGH
No
TONE CONTROLS
No
TONE BYPASS AND INPUT ASSIGN
No
RS232 CONTROL INPUT
No
POWER CONTROL OUTPUT
Yes, 1
REAR PANEL DATA PORTS
Yes, 1 in
REAR PANEL IR SENSOR INPUT
Yes
GENERAL SPECIFICATIONS
MULTI-CHASSIS OR SINGLE
Single
OUTPUT METERS
No
TUBE OR SOLID STATE
Solid State
ON, POWER CONSUMPTION
30 watts
DIMENSIONS (W X H X D)
17.5″ (44.45cm) x 3-7/8″ (9.8cm) x 16″ (40.64cm)
WEIGHT
13.5 lbs (6.1kg)
SHIPPING WEIGHT
28 lbs (12.7kg)